Cisco TelePresence DX70 and DX80
Introduction
xCommand UserManagement User Delete
Deletes a user from this device.
Requires user role: ADMIN
USAGE:
xCommand UserManagement User Delete Username: "Username" [YourPassphrase:
"YourPassphrase"]
where
Username
: String (0..127)
Specifies the username of the user that is deleted.
YourPassphrase
: String (0..255)
The passphrase of the user that is deleted.
xCommand UserManagement User Get
Shows the details of users on this device.
Requires user role: ADMIN
USAGE:
xCommand UserManagement User Get [ClientCertificateDN: "ClientCertificateDN"]
[Username: "Username"]
where
ClientCertificateDN
: String (0..255)
Identifies a user who logs in with a client certificate instead of a username and
password.
Username
: String (0..127)
Specify a username to show the details of a particular user.
D15363.05 Cisco TelePresence DX70 and DX80 API Reference Guide CE9.2, NOVEMBER 2017.
About the API
xConfiguration
xCommand
xCommand
xCommand UserManagement User List
Shows the list of users on this device.
Requires user role: ADMIN
USAGE:
xCommand UserManagement User List [Limit: Limit] [Offset: Offset]
where
Limit
: Integer (0..65536)
Limits the number of results that are shown. The default is set to 0.
Offset
: Integer (0..65536)
Shows lines with the same or higher Offset than the one provided. The default is set to
0.
136
API Reference Guide
xStatus
Appendices
Copyright © 2017 Cisco Systems, Inc. All rights reserved.