Xconfiguration Userinterface Osd Settingsmenu Mode; Usermanagement Configuration; Xconfiguration Usermanagement Ldap Mode; Xconfiguration Usermanagement Ldap Server Address - Cisco TelePresence DX70 Reference Manual

Cisco TelePresence DX70 and DX80

Introduction

xConfiguration UserInterface OSD SettingsMenu Mode

The Settings panel in the user interface (Touch 10 or on-screen) can be protected by the
video system's admin password. If this password is blank, anyone can access the settings in
the Settings menu, and for example factory reset the system. If authentication is enabled, all
settings that require authentication have a padlock icon. You will be prompted to enter the
administrator's user name and passphrase when you select the setting. Some settings do not
require authentication, they do not have a padlock icon.
Requires user role: ADMIN
Default value: Unlocked
USAGE:
xConfiguration UserInterface OSD SettingsMenu Mode:
where
Mode
: Locked/Unlocked
Locked: Authentication with administrator's username and passphrase is required.
Unlocked: No authentication is required.
D15363.05 Cisco TelePresence DX70 and DX80 API Reference Guide CE9.2, NOVEMBER 2017.
About the API xConfiguration xConfiguration
Mode
xCommand

UserManagement configuration

xConfiguration UserManagement LDAP Mode

The video system supports the use of an LDAP (Lightweight Directory Access Protocol) server
as a central place to store and validate user names and passwords. Use this setting to config-
ure whether or not to use LDAP authentication. Our implementation is tested for the Microsoft
Active Directory (AD) service.
Requires user role: ADMIN
Default value: Off
USAGE:
xConfiguration UserManagement LDAP Mode:
where
Mode
: Off/On
Off: LDAP authentication is not allowed.
On: For client certificate verification to work when LDAP authentication is enabled, the
codec requires a CA (Certificate Authority) certificate, and the user must have a Client
Certificate that matches their user distinguishing name (DN) in the active directory (AD).

xConfiguration UserManagement LDAP Server Address

Set the IP address or hostname of the LDAP server.
Requires user role: ADMIN
Default value: ""
USAGE:
xConfiguration UserManagement LDAP Server Address: "Address"
where
Address
: String (0, 255)
A valid IPv4 address, IPv6 address or hostname.
81
API Reference Guide
xStatus Appendices
Mode
Copyright © 2017 Cisco Systems, Inc. All rights reserved.