Xconfiguration Usermanagement Ldap Server Port; Xconfiguration Usermanagement Ldap Encryption; Xconfiguration Usermanagement Ldap Minimumtlsversion; Xconfiguration Usermanagement Ldap Verifyservercertificate - Cisco TelePresence DX70 Reference Manual

Cisco TelePresence DX70 and DX80

Introduction

xConfiguration UserManagement LDAP Server Port

Set the port to connect to the LDAP server on. If set to 0, use the default for the selected
protocol (see the UserManagement LDAP Encryption setting).
Requires user role: ADMIN
Default value: 0
USAGE:
xConfiguration UserManagement LDAP Server Port:
where
Port
: Integer (0..65535)
The LDAP server port number.

xConfiguration UserManagement LDAP Encryption

Define how to secure the communication between the video system and the LDAP server. You
can override the port number by using the UserManagement LDAP Server Port setting.
Requires user role: ADMIN
Default value: LDAPS
USAGE:
xConfiguration UserManagement LDAP Encryption:
where
Encryption
: LDAPS/None/STARTTLS
LDAPS: Connect to the LDAP server on port 636 over TLS (Transport Layer Security).
None: Connect to LDAP server on port 389 with no encryption.
STARTTLS: Connect to LDAP server on port 389, then send STARTTLS to enable TLS
encryption.
D15363.05 Cisco TelePresence DX70 and DX80 API Reference Guide CE9.2, NOVEMBER 2017.
About the API xConfiguration xConfiguration
Port
Encryption
xCommand

xConfiguration UserManagement LDAP MinimumTLSVersion

Set the lowest version of the TLS (Transport Layer Security) protocol that is allowed.
Requires user role: ADMIN
Default value: TLSv1.2
USAGE:
xConfiguration UserManagement LDAP MinimumTLSVersion:
where
MinimumTLSVersion
: TLSv1.0/TLSv1.1/TLSv1.2
TLSv1.0: Support TLS version 1.0 or higher.
TLSv1.1: Support TLS version 1.1 or higher.
TLSv1.2: Support TLS version 1.2 or higher.

xConfiguration UserManagement LDAP VerifyServerCertificate

When the video system connects to an LDAP server, the server will identify itself to the video
system by presenting its certificate. Use this setting to determine whether or not the video
system will verify the server certificate.
Requires user role: ADMIN
Default value: On
USAGE:
xConfiguration UserManagement LDAP VerifyServerCertificate:
VerifyServerCertificate
where
VerifyServerCertificate
: Off/On
Off: The video system will not verify the LDAP server's certificate.
On: The video system must verify that the LDAP server's certificate is signed by a
trusted Certificate Authority (CA). The CA must be on the list of trusted CAs that are
uploaded to the system in advance. Use the video system's web interface to manage
the list of trusted CAs (see more details in the administrator guide).
82
API Reference Guide
xStatus Appendices
MinimumTLSVersion
Copyright © 2017 Cisco Systems, Inc. All rights reserved.