Call Status; Xstatus Call [N] Answerstate; Xstatus Call [N] Attendedtransferfrom; Xstatus Call [N] Callbacknumber - Cisco TelePresence DX70 Reference Manual

Cisco TelePresence DX70 and DX80

Introduction

Call status

xStatus Call [n] AnswerState

Indicates if a call is answered, ignored or has been automatically answered by a system.
Requires user role: ADMIN, USER
Value space of the result returned:
Unanswered/Ignored/Autoanswered/Answered
Example:
xStatus Call AnswerState
*s Call 5 AnswerState: Answered
** end

xStatus Call [n] AttendedTransferFrom

Shows the CallId for the call the current call was transferred from.
Requires user role: ADMIN, USER
Value space of the result returned:
Integer
Example:
xStatus Call 1 AttendedTransferFrom
*s Call 1 AttendedTransferFrom: 1234
** end

xStatus Call [n] CallbackNumber

Shows the remote (far end) number or URI of an incoming or outgoing call, including the call
protocol, for call back. You can run the command xStatus Call to find the call identity.
Requires user role: ADMIN, USER
Value space of the result returned:
String
Example:
xStatus Call 27 CallbackNumber
*s Call 27 CallbackNumber: "h323:firstname.lastname@company.com"
** end
D15363.05 Cisco TelePresence DX70 and DX80 API Reference Guide CE9.2, NOVEMBER 2017.
About the API xConfiguration xCommand

xStatus Call [n] CallType

Shows the call type of the incoming or outgoing call. You can run the command xStatus Call to
find the call identity.
Requires user role: ADMIN, USER
Value space of the result returned:
Video/Audio/AudioCanEscalate/ForwardAllCall/Unknown
Example:
xStatus Call 27 CallType
*s Call 27 CallType: Video
** end

xStatus Call [n] DeviceType

Shows if the remote (far end) system is an endpoint (point-to-point call) or a multipoint confer-
encing unit (MCU) in the network. A MultiSite call hosted on an endpoint will also show as MCU.
Requires user role: ADMIN, USER
Value space of the result returned:
Endpoint/MCU
Example:
xStatus Call DeviceType
*s Call 4 DeviceType: Endpoint
** end

xStatus Call [n] Direction

States the direction of the call initiation. You can run the command xStatus Call to find the call
identity.
Requires user role: ADMIN, USER
Value space of the result returned:
Incoming/Outgoing
Example:
xStatus Call 27 Direction
*s Call 27 Direction: Outgoing
** end
150
API Reference Guide
xStatus xStatus Appendices
Copyright © 2017 Cisco Systems, Inc. All rights reserved.