Cisco TelePresence DX70 and DX80
Introduction
xCommand UserInterface Branding Upload
Uploads a branding image to this device, which displays in the chosen area. This is a multiline
command.
Requires user role: ADMIN, INTEGRATOR, USER
USAGE:
xCommand UserInterface Branding Upload Type:
where
Type
: Literal (Background / Branding / HalfwakeBackground / HalfwakeBranding)
Specifies the area in which the uploaded image is to display.
xCommand UserInterface Extensions Clear
Delete all user interface extensions (widgets) from the video system.
Requires user role: ADMIN
USAGE:
xCommand UserInterface Extensions Clear
xCommand UserInterface Extensions List
List all user interface extensions (widgets) that exist on the video system.
Requires user role: INTEGRATOR, ROOMCONTROL, USER
USAGE:
xCommand UserInterface Extensions List
D15363.05 Cisco TelePresence DX70 and DX80 API Reference Guide CE9.2, NOVEMBER 2017.
About the API
xConfiguration
Type
xCommand
xCommand
xCommand UserInterface Extensions Set
Set the configuration scheme you have chosen in the user interface extensions (widgets)
for your room system. Updates the UserInterface Extensions status tree. This is a multiline
command.
Requires user role: ADMIN, INTEGRATOR, ROOMCONTROL
USAGE:
xCommand UserInterface Extensions Set ConfigId: "ConfigId"
where
ConfigId
: String (0, 40)
The unique identifier for the configuration.
xCommand UserInterface Extensions Widget Action
Sets the action of the given widget. Updates the UserInterface Extensions status tree.
Requires user role: ADMIN, INTEGRATOR, ROOMCONTROL, USER
USAGE:
xCommand UserInterface Extensions Widget Action [Type: "Type"] [Value: "Value"]
WidgetId: "WidgetId"
where
Type
: String (0..255)
The type of widget that is set.
Value
: String (0..255)
The value of the widget. The range of values depends on the widget type.
WidgetId
: String (0..40)
The unique identifier for the widget.
128
API Reference Guide
xStatus
Appendices
Copyright © 2017 Cisco Systems, Inc. All rights reserved.