Xcommand Userinterface Presentation Externalsource List; Xcommand Userinterface Presentation Externalsource Remove; Xcommand Userinterface Presentation Externalsource Removeall; Xcommand Userinterface Presentation Externalsource Select - Cisco TelePresence DX70 Reference Manual

Cisco TelePresence DX70 and DX80

Introduction

xCommand UserInterface Presentation ExternalSource List

Returns the current list of external input sources.
Requires user role: ADMIN, INTEGRATOR, ROOMCONTROL
USAGE:
xCommand UserInterface Presentation ExternalSource List

xCommand UserInterface Presentation ExternalSource Remove

Remove the input source (specified by the SourceIdentifier) from the list of external input
sources.
Requires user role: ADMIN, INTEGRATOR, ROOMCONTROL
USAGE:
xCommand UserInterface Presentation ExternalSource Remove SourceIdentifier:
"SourceIdentifier"
where
SourceIdentifier
: String (0, 40)
The unique string that identifies this input source. It was defined when the source was
created with the UserInterface Presentation ExternalSource Add command.

xCommand UserInterface Presentation ExternalSource RemoveAll

Remove all input sources from the list of external input sources.
Requires user role: ADMIN, INTEGRATOR, ROOMCONTROL
USAGE:
xCommand UserInterface Presentation ExternalSource RemoveAll
D15363.05 Cisco TelePresence DX70 and DX80 API Reference Guide CE9.2, NOVEMBER 2017.
About the API xConfiguration xCommand xCommand

xCommand UserInterface Presentation ExternalSource Select

Starts to present the input source (specified by the SourceIdentifier) if it is in Ready state (see
the UserInterface Presentation ExternalSource State Set command). The input source will be
shown in the user interface sharetray as "Presenting".
Requires user role: ADMIN, INTEGRATOR, ROOMCONTROL, USER
USAGE:
xCommand UserInterface Presentation ExternalSource Select SourceIdentifier:
"SourceIdentifier"
where
SourceIdentifier
: String (0, 40)
The unique string that identifies this input source. It was defined when the source was
created with the UserInterface Presentation ExternalSource Add command.
133
API Reference Guide
xStatus Appendices
Copyright © 2017 Cisco Systems, Inc. All rights reserved.