Phonebook Commands; Xcommand Phonebook Contact Add; Xcommand Phonebook Contact Delete - Cisco TelePresence DX70 Reference Manual

Cisco TelePresence DX70 and DX80

Introduction

Phonebook commands

xCommand Phonebook Contact Add

Requires user role: ADMIN, USER
USAGE:
xCommand Phonebook Contact Add Name: "Name" [FolderId: "FolderId"] [ImageURL:
"ImageURL"] [Title: "Title"] [Number: "Number"] [Protocol: Protocol] [CallRate:
CallRate] [CallType: CallType] [Device: Device] [Tag: Tag]
where
Name
: String (0, 255)
The name of the contact.
FolderId
: String (0, 255)
The unique identifier for the folder that you want to store the contact in. The identifier
will be returned by an xCommand Phonebook Search command. It was also returned
when the xCommand Phonebook Folder Add command was issued to make the folder.
ImageURL
: String (0, 255)
Currently not in use.
Title
: String (0, 255)
The title of the contact.
Number
: String (0, 255)
The phone number or address of the contact.
Protocol
: Auto/H320/H323/SIP/Spark
Select the Auto, Spark, SIP, H323 or H320 protocol.
CallRate
: Integer (0..6000)
Set a call rate. The default is set to 0.
CallType
: Audio/Video
Select a call type (audio or video).
Device
: Mobile/Other/Telephone/Video
Select the device type.
Tag
: Untagged/Favorite
Tag the contact as a Favorite, or untag an already tagged contact.
D15363.05 Cisco TelePresence DX70 and DX80 API Reference Guide CE9.2, NOVEMBER 2017.
About the API xConfiguration xCommand xCommand

xCommand Phonebook Contact Delete

Delete an existing contact from the local phonebook.
Requires user role: ADMIN, USER
USAGE:
xCommand Phonebook Contact Delete ContactId: "ContactId"
where
ContactId
: String (0, 255)
The unique identifier for the contact. The identifier will be returned by an xCommand
Phonebook Search command. It was also returned when the xCommand Phonebook
Contact Add command was issued to make the contact.
113
API Reference Guide
xStatus Appendices
Copyright © 2017 Cisco Systems, Inc. All rights reserved.