Xcommand Security Certificates Services Deactivate; Xcommand Security Certificates Services Delete; Xcommand Security Certificates Services Show - Cisco TelePresence DX70 Reference Manual

Cisco TelePresence DX70 and DX80

Introduction

xCommand Security Certificates Services Deactivate

Deactivates security certificates on this device.
Requires user role: ADMIN
USAGE:
xCommand Security Certificates Services Deactivate Fingerprint: "Fingerprint"
Purpose: Purpose
where
Fingerprint
: String (0..128)
The unique Identifier for the certificate that is deactivated. You can get the fingerprint ID
by running xCommand Security Certificates Services Show.
Purpose
: Literal (802.1X / HTTPS / Audit / SIP)
The type of service which applies to this certificate.

xCommand Security Certificates Services Delete

Deletes security certificates from this device.
Requires user role: ADMIN
USAGE:
xCommand Security Certificates Services Delete Fingerprint: "Fingerprint"
where
Fingerprint
: String (0..128)
The unique Identifier for the certificate that is deleted. You can get the fingerprint ID by
running xCommand Security Certificates Services Show.
D15363.05 Cisco TelePresence DX70 and DX80 API Reference Guide CE9.2, NOVEMBER 2017.
About the API xConfiguration xCommand xCommand

xCommand Security Certificates Services Show

Shows details for security certificates on this device.
Requires user role: ADMIN, USER
USAGE:
xCommand Security Certificates Services Show [Filter: Filter] [Format: Format]
where
Filter
: Literal (802.1X / HTTPS / Audit / SIP)
Filters the results according to the chosen service.
Format
: Literal (PEM / Text )
Specifies the format of the results. The default is set to text.
121
API Reference Guide
xStatus Appendices
Copyright © 2017 Cisco Systems, Inc. All rights reserved.