Download Print this page
Hide thumbs Also See for DX70:

Advertisement

Cisco DX70
INSTALLATION GUIDE
78-21622-01 C0 | JULY 2014 © 2014 Cisco Systems, Inc. All rights reserved.
1

Advertisement

loading

Summary of Contents for Cisco DX70

  • Page 1 Cisco DX70 INSTALLATION GUIDE 78-21622-01 C0 | JULY 2014 © 2014 Cisco Systems, Inc. All rights reserved.
  • Page 2: Optional Accessories

    User Guides For user guides and compliance and safety information for this product, go to: http://www.cisco.com/go/dx-docs Room Setup For more information on how to set up your room for the best video experience, visit the Project Workplace tool at http://www.cisco.com/go/projectworkplace...
  • Page 3: Connect Cables

    Connect Cables 1. Pull the foot stand, set the DX70 in an upright position and adjust the angle. 2. Flip the connector cover up to access the connector panel. 3. Connect the Ethernet cable (A) between the network connector and a network wall socket.
  • Page 4: Start The System

    Start the System 1. Push the power button to start up the DX70. The power button’s LED lights up when the device starts up. 2. Follow the on-screen instructions to set up the system. For more information on how to set up the system, see the Administrator Guide at http://www.cisco.com/go/dx-docs...
  • Page 5: Front And Side Panels

    Turn the privacy shutter to open and close the camera. Use the source button to show and hide your computer screen when a computer is connected to the DX70. Adjust Camera and Stand You can tilt the camera to adjust the camera angle and to activate the document camera feature.
  • Page 6: Corporate Headquarters

    170 West Tasman Dr. San Jose, CA 95134 USA Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners.