From Collaboration Software version 8.2 (CE8.2) all DX80 and described in the Getting started guide. DX70 units can run CE software, which is the same software that ► User documentation on the Cisco web site runs on the Cisco TelePresence SX and MX Series.
System settings Appendices DX70 and DX80 at a glance The Cisco DX70 and DX80 are all-in-one units designed to video- enable small collaboration spaces. They are high quality featuring high-definition (HD) video, unified communications features, a display for your laptop, and expanded capabilities.
View shared content, review previous slides, save selected slides • Available on smartphones and tablets (iOS and Android) • For DX70 and DX80, this service is available only when in a call Wireless share from a desktop client: • Share content without connecting a presentation cable •...
You can always use a headset with these systems because: and thereby also ultrasound emission - On and Off. • DX70 and DX80 have dedicated headset outputs, on which we Most people are exposed to ultrasound more or less daily in many never emit ultrasound.
You can customize our touch user interfaces to include input sources that are connected to a third-party external video switch. You need a Cisco video system with a touch interface, a third- The sources will appear and behave as any other video source party control system, for example Crestron or AMX, and a third- that is connected directly to the video system.
From Collaboration Software version 8.2 (CE8.2) all DX80 and Find a detailed description about how to convert from Android- DX70 units can run CE software, which is the same software that based software and CE software, and vice versa, in the Cisco runs on the Cisco TelePresence SX and MX Series.
Factory reset DX70 using the mute and volume buttons Follow these steps to factory reset a DX70 on boot up. If the video system is on, press and hold the power button until the system shuts down before you continue.
(Cisco Unified Communications Manager (CUCM) version Default value: Off 9.1.2 or newer, Cisco TelePresence Video Communication Server (VCS) version X8.1 or newer, Cisco Media Server (CMS) version 2.1 or newer). Change this setting if you want to Value space: Off/On disable the active control features.
Define the Peap (Protected Extensible Authentication Protocol) mode. Authenticates LAN Define the static IPv4 network address for the system. Applicable only when Network IPv4 clients without the need for client certificates. Developed by Microsoft, Cisco and RSA Assignment is set to Static.
Default value: Auto Value space: Auto/Manual/Off Auto: The Cisco Discovery Protocol (CDP), if available, assigns an id to the voice VLAN. If CDP is not available, VLAN is not enabled. Manual: The VLAN ID is set manually using the Network VLAN Voice VlanId setting. If CDP is available, the manually set value will be overruled by the value assigned by CDP.
NetworkServices CDP Mode NetworkServices HTTP Mode Enable or disable the CDP (Cisco Discovery Protocol) daemon. Enabling CDP will make the Define whether or not to allow access to the video system using the HTTP or HTTPS (HTTP endpoint report certain statistics and device identifiers to a CDP-enabled switch. If CDP is Secure) protocols.
These password is "public". If you have the Cisco TelePresence Management Suite (TMS) you variables can then be queried (set to ReadOnly) and sometimes set (set to ReadWrite) by must make sure the same SNMP Community is configured there too.
On: The SSH public key is allowed. Some DX video systems ship without the built-in Wi-Fi adapter (the PID, which you find on the rating label at the rear of the video system, are CP-DX80-NR-K9=, or CP-DX70-W- NetworkServices Telnet Mode NR-K9= for these units).
CUCM: The phonebook is located on the Cisco Unified Communications Manager. Spark: The phonebook is located on Spark. TMS: The phonebook is located on the Cisco TelePresence Management Suite server. VCS: The phonebook is located on the Cisco TelePresence Video Communication Server.
Spark: Push configurations to the video system from Spark. TMS: Push configurations to the video system from TMS (Cisco TelePresence Management System). VCS: Push configurations to the video system from VCS (Cisco TelePresence Video Communication Server). Provisioning LoginName This is the username part of the credentials used to authenticate the video system with the provisioning server.
This is the password part of the credentials used to authenticate the video system with the Only applicable when the endpoint is provisioned by Cisco Unified Communication Manager provisioning server. This setting must be used when required by the provisioning server.
In order to use a client, at least one of the Proximity services must be must be On for this setting to take any effect. enabled (refer to the Proximity Services settings). In general, Cisco recommends enabling all the Proximity services.
ICE (Interactive Connectivity Establishment, RFC 5245) is a NAT traversal solution that the When registered to a Cisco Unified Communications Manager (CUCM) the endpoint may be video systems can use to discover the optimized media path. Thus the shortest route for part of a shared line.
Default value: "" Value space: Standard/Cisco Value space: String (0, 255) Standard: Use this when registering to standard SIP Proxy (tested with Cisco The preferred format is DNS SRV record (e.g. _turn._udp.<domain>), or it can be a valid TelePresence VCS and Broadsoft) IPv4 or IPv6 address.
You can customize the user interface to allow control of peripherals in a meeting room, for example lights and blinds. You need a Cisco video system with a touch interface, and a third- You can use the In-Room Control editor This allows for the powerful combination of a control system’s...
All images in these materials are for representational purposes only, actual products may differ. Cisco and the Cisco Logo are trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and other countries. A listing of Cisco’s trademarks can be found at www.cisco.com/go/trademarks. Third party trademarks mentioned are the property of their respective owners.
ANY INDIRECT, SPECIAL, CONSEQUENTIAL, OR INCIDENTAL DAMAGES, INCLUDING, WITHOUT LIMITATION, LOST PROFITS On our web site you will find an overview of the worldwide Cisco contacts. OR LOSS OR DAMAGE TO DATA ARISING OUT OF THE USE OR INABILITY TO USE THIS MANUAL, EVEN IF CISCO OR ITS...