Unpacking And Inspection - Klein 5000 SERIES Operation And Maintenance Manual

CHAPTER 3: P
This chapter provides instructions for unpacking and preparing your equipment for
use in the field, including detailed instructions on the following:
TPU setup.
equipment lifetime.
Computer setup.
Unit (computer) to optimize performance and equipment lifetime.
Power connection.
importance of proper grounding techniques.
Towfish assembly.
Tow cable hookup.
TPU, the computer, and the towfish to ensure noise free, safe towing.
3.1

Unpacking and Inspection

3.1.1
Remove the TPU from the shipping container and set it on a sturdy, flat surface.
Inspect the TPU for signs of damage. If there is any damage or if any items are
missing, immediately contact Klein Marine Systems, Inc. or your KMS sales
representative. Record the serial number of the TPU; it can be found on a sticker
on the rear of the unit.
3.1.2
Remove the computer from the shipping container, and set it on a sturdy, flat
surface. Inspect the computer for signs of damage. If there is any damage or if any
items are missing, immediately contact Klein Marine Systems, Inc. or your KMS
sales representative. Record the serial numbers of the computer modules.
REPARATION FOR
Guidelines for installing the TPU to optimize performance and
Guidelines for installing the Computer Display and Control
Power requirements and connection procedures and the
How to assemble the towfish.
Proper techniques for attaching the tow cable to the
Unpacking the TPU
Unpacking the Computer Display and Control
Unit (Computer)
3-1
U
SE