Klein 5000 SERIES Operation And Maintenance Manual page 142

D-28
APPENDIX D General Setup, Configuration and Troubleshooting
set RANGE 2
set TXWAVEFORM 0
set RESPDIV 15
set RESPFREQ 7
set DVLDELAYDELTA 31
set HEARTBEAT 0
set PINGSPERFILE 5000
set SPEEDSOUND 150000
set BEAMBALANCE 100
set PREEMPHASIS 2
set LBOGAIN 1
set DIAGLEVEL 0
SonarPro needs to know the
IP address of the TPU. Start
SonarPro, and then click
to connect to the towfish in
real time. The TPU
Connection dialog box will
open. Enter the TPU IP
address into the dialog box if
different.
The LAN configuration should now be complete.
While you have the TPU Connection dialog box open, click
Change the Sonar Channel Configuration
settings in the Channels and Sensors dialog box as shown.
Series 5000 Sonar System Operations and Maintenance Manual
and verify the
P/N 11210060, Rev. 16