Chapter 3: Setup And Test; Unpacking And Inspection - Klein 4900 Series Operation And Maintenance Manual

CHAPTER 3: S
This chapter provides instructions for unpacking the Series 4900 Sonar System,
connecting its components and a navigation system, and testing the system both on
deck and at sea. Descriptions of all the connections and the operator controls and
indicators on the SP-III TPU or Rack Mount TPU are also included.
3.1

Unpacking and Inspection

The towfish and the topside system components, including associated cables and
documentation, are shipped in multiple shipping cases. Unpack all of the cases and
verify that all of the items listed on the packing list have been received. If any
items are damaged or missing, immediately contact Klein Marine Systems, Inc. or
your KMS sales representative. In addition, record the serial numbers for the
towfish, the SP-III TPU or Rack Mount TPU, and the laptop or SonarPro
Workstation. The towfish serial number can be found on the towfish tow bracket.
Refer to Figure 1-1 on page 1-3 for the location of the tow bracket. The serial
numbers for the SP-III TPU or Rack Mount TPU and the laptop or SonarPro
Workstation can be found on the rear panel of each. The Series 4900 Sonar System
typically includes the following items:
• Towfish
• SP-III TPU or Rack Mount TPU
• Laptop or SonarPro Workstation
• Tow cable
• Cable kit containing:
AC power cord
DC power cord
Ethernet cable
Null modem cable
GPS cable (customer GPS)
• Accessory tool kit
• Safety cable
• Thumb drive with manuals and software
T
ETUP AND EST
3-1