Tail Fins Being Inserted Into Tail Cone; Tail Fins Being Secured To Tail Cone; Figure; Removing The Fixed Tail Cone Assembly - Klein 5000 SERIES Operation And Maintenance Manual

4-6
CHAPTER 4 Equipment Maintenance
6. Install the two horizontal
tail fins (2) and the vertical
tail fin (3) by inserting the
forward slot into the
towfish body. The rearward
slot should be secured by
the retaining cup.
7. Tighten the retaining cup
bolt (7) so that the tail fins
are secured.
4.4

Removing the Fixed Tail Cone Assembly

Removal of the fixed tail cone assembly is the reverse of the installation
procedure.
Series 5000 Sonar System Operations and Maintenance Manual

Figure 4-6:

Tail Fins being Inserted into Tail
Cone
Figure 4-7:
Tail Fins being Secured to Tail
Cone
P/N 11210060, Rev. 16