D.8.14 Checking The Sensors - Klein 5000 SERIES Operation And Maintenance Manual

D-50
APPENDIX D General Setup, Configuration and Troubleshooting
Figure D-25:

D.8.14 Checking the Sensors

Sensor readings can be read out directly in the Information window as shown in
Figure D-25 above. Move the towfish in pitch, roll and heading and check to see if
the readings change. If you have no sensor readings, check that the cable is
properly plugged into the sensor interface board at JP5. Also check that the cable is
properly connected at the compass board.
Series 5000 Sonar System Operations and Maintenance Manual
Figure D-24:
Sample Transmit Waveform
Image in Sonar Viewer Window for Display Test Pattern #1
P/N 11210060, Rev. 16