Specifications - Klein 5000 SERIES Operation And Maintenance Manual

5. Wait for the network connection to establish communications with the computer.
6. Switch the RUN/STAND BY switch to RUN.
7. The boot sequence will begin, and when completed, the CARRIER LOSS and
LOCK LOSS indicators on the Demultiplexer board will turn off. These
indicators can be viewed through the view ports on the connector panel of the
TPU.
5.4

Specifications

The specifications for the Splashproof TPU, except for those listed below, are the
same as the rack mount TPU. Refer to CHAPTER 2: "Specifications," for those
specifications.
Power consumption:
Input voltages:
Size:
Weight:
Operating temperature:
Ingress protection:
5.5 Splashproof TPU Drawings
Listed in Table 5-1 are the drawings for the Splashproof TPU. They are provided
for reference and troubleshooting purposes.
NOTE Specifications are typical and subject to change without notice.
Specifications
250 VA (nominal)
115 or 230 VAC, 50–60 Hz, manually
selected; or +12 VDC at 12 A
52.5 cm (20.7 in.) wide
21.7 cm (8.5 in.) high
43.6 cm (17.2 in.) deep
16.4 kg (36 lb)
0–40° C with vent open; 0–30° C with
vent closed
Designed to IP-66 with vent closed;
IP-56 with vent open
5-11