Table of Contents
Advertisement
Note: When you order the lift tool, you will receive an 18–inch load plate. Do not
You must provide the following information when you order the lift tool. This
information is necessary to ensure that the lift tool is delivered when you need it.
Failure to provide this information might delay the completion of the order request
and the shipping request. It might also result in a time and date to return the tool
that is different from what you need.
v Phone number and customer contact
v Account code: 98577
v Time and date of delivery
v Accurate destination address with zip code
v Time and date of return pickup
You must return the lift tool at the time that was scheduled with UPS Logistics. If
you need to change the scheduled return time or date, contact UPS Logistics.
You are responsible for ensuring that all of the paperwork and components are
packed and restored in the arbocrate (shipping container) of the lift tool. Ensure that
the lift tool is functioning properly before you release the tool to UPS Logistics for
return. You are accountable for the lift tool until UPS Logistics picks up the lift tool
for return delivery to their parts storage facility.
Contact your branch office tools coordinator or your region specialist if you have
any questions or concerns.
2109 Model M12 standard shipment
An M12 is shipped with the following items:
v The M12, which includes:
v One accessory kit that contains the following items:
use the 18–inch load plate. You must order and use a 24–inch load plate
when you install the M12.
– Four to eight 16–port cards (customer-specified configuration)
– Two CP cards
– Four power supplies
– Three blower assemblies
– IBM TotalStorage SAN 2109 Model M12 Installation and Service Guide
– 2109 Model M12 documentation CD-ROM
– ESD grounding strap
– One serial cable
– The 14U chassis mount kit with installation instructions
– Bridge tool: PN 18P5855
Note: You can order SFP transceivers separately from IBM. The 2109 Model
M12 supports both SWL and LWL transceivers.
Chapter 5. Installing and removing Model M12 switches
41
Advertisement
Table of Contents
