Table of Contents
Advertisement
Appendix A. Product specifications
This appendix contains the 2109 Model C36 with Model M12 specifications.
2109 Model M12 components
The 2109 Model M12 contains the following components:
v A 14U chassis, designed to be mounted in a 48.26 cm (19 in.) rack. Two 2109
v 16-port cards in configurations up to eight cards per chassis, with 16 optical ports
v Two CP cards, each with:
v Four power supplies with built-in fans. The power supplies plug into internal
v Two ac power inlet connectors with ac power switches (power panel).
v A WWN card and bezel.
v Three blower assemblies for forced-air cooling of the 16-port cards and the CP
Air enters inlet vents on the blower assembly side of the chassis and exits through
vents on the port side of the chassis. The blower speed is governed by inlet air
temperature. The blowers go into high speed when the inlet air temperature
exceeds 33°C (91°F).
Physical dimensions
The dimensions of the 2109 Model M12 are listed in Table 6.
2109 Model M12 and component weights
The weight of a fully-loaded 2109 Model M12, as well as the weights of individual
components, are listed in Table 7.
© Copyright IBM Corp. 2002, 2003
Model M12 switches can be mounted in a 2109 Model C36 cabinet.
per card, compatible with SFPs.
– One modem serial port with a DB-9 connector (full RS-232)
– One terminal serial port with a DB-9 connector (RS-232 signal subset)
– One IEEE compliant RJ-45 connector for use with a 10 Mbps or 100 Mbps
Ethernet connection
– A real-time clock (RTC) with a 10-year battery and 56 bytes of NVRAM
blind-mate connectors when installed in the chassis.
cards.
Table 6. Physical dimensions of the 2109 Model M12
Dimension
Height
Depth
Depth with door
Width
Table 7. Component weights
Component
Fully loaded chassis
Empty chassis
Value
14U (24.11 in.)
70.9 cm (27.9 in.)
72.9 cm (28.7 in.)
43.7 cm (17.2 in.)
Weight
Approximately 114 kg (250.0 lbs)
47.1 kg (104.0 lbs)
17
Advertisement
Table of Contents
