Table of Contents
Advertisement
1. Check for any non-IBM changes that might have been made to the machine. If
2. Check the condition of the inside of the machine for:
3. Check for any obvious mechanical problems, such as loose components.
4. Check any exposed cables and connectors for wear, cracks, or pinching.
Safety label checks
Perform the following safety label checks:
1. Verify that the safety label shown in Figure 1 is installed on the switch.
Figure 1. Safety label on the Model M12
2. Verify that the linecord safety label shown in Figure 2 is installed on the Model
Figure 2. Linecord caution label
3. Verify that the power supply cover caution label shown in Figure 3 on page xvi
any are present, obtain the "Non-IBM Alteration Attachment Survey" form,
number R009, from the IBM branch office. Complete the form and return it to
the branch office.
v Metal or other contaminants
v Indications of water or other fluid
v Fire
v Smoke damage
M12 power supply.
PSU1
PSU2
is installed on the Model M12 power supply.
> 240 V ~
SJ000325
Safety and environmental notices
xv
Advertisement
Table of Contents
