Tilt Warning Label; Genie Tool And Load Plate Label - IBM totalstorage 2109 M12 Installation And Service Manual

Figure 9. Tilt warning label
3. Verify that the genie tool and load plate label shown in Figure 10 is installed on
Figure 10. Genie tool and load plate label
4. Verify that the pinch point label shown in Figure 11 on page xxi is installed on
xx
IBM TotalStorage SAN Switch: 2109 Model M12 Installation and Service Guide
<113.4 kg (250 lb)
PN 18P5850-C
the load plate.
THIS BRIDGE SHOULD BE USED
WITH GENIE TOOL (P/N 09P2481)
AND LOAD PLATE (P/N 11P4369)
UTILIZZARE QUESTO PONTE
INSIEME ALLO STRUMENTO GENIE
(P/N 09P2481)E ALLA PIASTRA
DI CARICO (P/N 11P4369)
ESTE BRIDGE DEVE SER
UTILIZADO COM A FERRAMENTA
GENIE (P/N 09P2481) E A PLACA
DE CARREGAMENTO (P/N 11P4369)
P/N 18P5850 - A
the load plate.
SJ000750
SJ000751