Reset Counters Interface - HP 12500 Series Command Reference Manual

Routing, layer 2 - lan switching
Table of Contents

Advertisement

Parameters
number: Specifies the number of the aggregate interface that corresponds to an aggregation group,
in the range of 1 to 1024. The switch supports a maximum of 240 aggregation groups.
Usage guidelines
A Layer 2 Ethernet interface can be assigned to a Layer 2 aggregation group only, and a Layer 3
Ethernet interface can be assigned to a Layer 3 aggregation group only.
An Ethernet interface can belong to only one aggregation group.
Examples
# Assign Layer 2 Ethernet interface GigabitEthernet 3/0/1 to Layer 2 aggregation group 1.
<Sysname> system-view
[Sysname] interface GigabitEthernet 3/0/1
[Sysname-GigabitEthernet3/0/1] port link-aggregation group 1
# Assign Layer 3 Ethernet interface GigabitEthernet 3/0/2 to Layer 3 aggregation group 2.
<Sysname> system-view
[Sysname] interface GigabitEthernet 3/0/2
[Sysname-GigabitEthernet3/0/2] port link-aggregation group 2

reset counters interface

Use reset counters interface to clear the statistics for the specified aggregate interface or
interfaces.
Syntax
reset counters interface [ { bridge-aggregation | route-aggregation } [ interface-number ] ]
Views
User view
Predefined user roles
network-admin
mdc-admin
Parameters
bridge-aggregation: Clears statistics for Layer 2 aggregate interfaces.
route-aggregation: Clears statistics for Layer 3 aggregate interfaces.
interface-number: Specifies an existing aggregate interface by its number.
Usage guidelines
Before collecting statistics for a Layer 2 aggregate interface within a specific period, clear its
existing statistics.
If no option is specified, the command clears the statistics for all interfaces in the system.
If only the bridge-aggregation or route-aggregation keyword is specified, the command clears the
statistics for all Layer 2 or Layer 3 aggregate interfaces.
If the bridge-aggregation interface-number or route-aggregation interface-number option is
specified, the command clears the statistics for the specified Layer 2 or Layer 3 aggregate interface.
35

Advertisement

Table of Contents
loading

Table of Contents