HP 12500 Series Command Reference Manual page 26

# Display detailed link aggregation information for GigabitEthernet 3/0/2, which is a member port
of a dynamic aggregation group.
<Sysname> display link-aggregation member-port GigabitEthernet 3/0/2
Flags: A -- LACP_Activity, B -- LACP_Timeout, C -- Aggregation,
D -- Synchronization, E -- Collecting, F -- Distributing,
G -- Defaulted, H -- Expired
GigabitEthernet3/0/2:
Aggregate Interface: Bridge-Aggregation10
Local:
Port Number: 2
Port Priority: 32768
Oper-Key: 2
Flag: {ACDEF}
Remote:
System ID: 0x8000, 000f-e267-6c6a
Port Number: 26
Port Priority: 32768
Oper-Key: 2
Flag: {ACDEF}
Received LACP Packets: 5 packet(s)
Illegal: 0 packet(s)
Sent LACP Packets: 7 packet(s)
Table 6 Command output
Field
Flags
Aggregate Interface
Local
Oper-key
Description
LACP state flags. This field is 1 byte long, represented by ABCDEFGH from the
least significant bit to the most significant bit. The letter is present when its bit
is 1 and absent when its bit is 0.
•
A—Indicates whether LACP is enabled. 1 indicates enabled, and 0 indicates
disabled.
• B—Indicates the LACP short or long timeout. 1 indicates short timeout, and
0 indicates long timeout.
• C—Indicates whether the sending system considers that the link is
aggregatable. 1 indicates yes, and 0 indicates no.
• D—Indicates whether the sending system considers that the link is
synchronized. 1 indicates yes, and 0 indicates no.
• E—Indicates whether the sending system considers that the incoming
frames are collected. 1 indicates yes, and 0 indicates no.
• F—Indicates whether the sending system considers that the outgoing
frames are distributed. 1 indicates yes, and 0 indicates no.
• G—Indicates whether the sending system receives frames in the default
state. 1 indicates yes, and 0 indicates no.
• H—Indicates whether the sending system receives frames in the expired
state. 1 indicates yes, and 0 indicates no.
Aggregate interface to which the member port belongs.
Information about the local end.
Operational key.
21