Stp Config-Digest-Snooping - HP 12500 Series Command Reference Manual

legacy: Configures the ports to receive and send only compatible-format MSTP BPDUs.
Usage guidelines
When the setting is configured in Layer 2 Ethernet interface view, it takes effect on only that
interface.
When the setting is configured in Layer 2 aggregate interface view, it takes effect on only the
aggregate interface.
When the setting is configured on a member port in an aggregation group, it takes effect only after
the port leaves the aggregation group.
Examples
# Configure GigabitEthernet 3/0/1 to send only standard-format (802.1s) MSTP packets.
<Sysname> system-view
[Sysname] interface GigabitEthernet 3/0/1
[Sysname-GigabitEthernet3/0/1] stp compliance dot1s

stp config-digest-snooping

Use stp config-digest-snooping to enable digest snooping.
Use undo stp config-digest-snooping to disable digest snooping.
Syntax
stp config-digest-snooping
undo stp config-digest-snooping
Default
The feature is disabled.
Views
Layer 2 Ethernet interface view, Layer 2 aggregate interface view
Predefined user roles
network-admin
mdc-admin
Usage guidelines
Enable this feature both globally and on ports connected to other vendors' devices. To minimize
impact, enable the feature on all associated ports before you enable it globally.
When the setting is configured in Layer 2 Ethernet interface view, it takes effect on only that
interface.
When the setting is configured in Layer 2 aggregate interface view, it takes effect on only the
aggregate interface.
When the setting is configured on a member port in an aggregation group, it takes effect only after
the port leaves the aggregation group.
Examples
# Enable digest snooping on GigabitEthernet 3/0/1 and then globally.
<Sysname> system-view
63