Stp Global Config-Digest-Snooping - HP 12500 Series Command Reference Manual

When the setting is configured on a member port in an aggregation group, it takes effect only after
the port leaves the aggregation group.
Examples
# In MSTP mode, disable the spanning tree feature on port GigabitEthernet 3/0/1.
<Sysname> system-view
[Sysname] interface GigabitEthernet 3/0/1
[Sysname-GigabitEthernet3/0/1] undo stp enable
Related commands
stp global enable
•
stp mode
•

stp global config-digest-snooping

Use stp global config-digest-snooping to enable digest snooping globally.
Use undo stp global config-digest-snooping to disable digest snooping globally.
Syntax
stp global config-digest-snooping
undo stp global config-digest-snooping
Default
The feature is disabled globally.
Views
System view
Predefined user roles
network-admin
mdc-admin
Usage guidelines
Enable this feature both globally and on ports connected to other vendors' devices. To minimize
impact, enable the feature on all associated ports before you enable it globally.
Examples
# Enable digest snooping on GigabitEthernet 3/0/1 and then globally.
<Sysname> system-view
[Sysname] interface GigabitEthernet 3/0/1
[Sysname-GigabitEthernet3/0/1] stp config-digest-snooping
[Sysname-GigabitEthernet3/0/1] quit
[Sysname] stp global config-digest-snooping
Related commands
display stp
•
stp config-digest-snooping
•
67