Stp Point-To-Point - HP 12500 Series Command Reference Manual

Syntax
stp pathcost-standard { dot1d-1998 | dot1t | legacy }
undo stp pathcost-standard
Default
The standard used by the device is legacy.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
dot1d-1998: Configures the device to calculate the default path cost for ports based on IEEE
802.1d-1998.
dot1t: Configures the device to calculate the default path cost for ports based on IEEE 802.1t.
legacy: Configures the device to calculate the default path cost for ports based on a private
standard.
Usage guidelines
If you change the standard that the device uses in calculating the default path costs, you restore
the path costs to the default.
Examples
# Configure the device to calculate the default path cost for ports based on IEEE 802.1d-1998.
<Sysname> system-view
[Sysname] stp pathcost-standard dot1d-1998
Related commands
display stp
•
stp cost
•

stp point-to-point

Use stp point-to-point to configure the link type of the ports.
Use undo stp point-to-point to restore the default.
Syntax
stp point-to-point { auto | force-false | force-true }
undo stp point-to-point
Default
The default setting is auto, and the spanning tree device automatically detects whether a port
connects to a point-to-point link.
Views
Layer 2 Ethernet interface view, Layer 2 aggregate interface view
74