Name - HP 12500 Series Command Reference Manual

Predefined user roles
network-admin
mdc-admin
Parameters
size: Sets the MTU in bytes, which is in the range of 64 to 9198.
Usage guidelines
If both the mtu command and the ip mtu command are supported and configured on the VLAN
interface, the MTU set by using the ip mtu command is used for fragmenting packets. For more
information about the ip mtu command, see Layer 3—IP Services Command Reference.
Examples
# Set the MTU to 1492 bytes for VLAN-interface 1.
<Sysname> system-view
[Sysname] interface vlan-interface 1
[Sysname-Vlan-interface1] mtu 1492
Related commands
display interface vlan-interface

name

Use name to configure a name for the VLAN.
Use undo name to restore the default name of the VLAN.
Syntax
name text
undo name
Default
The name of a VLAN is VLAN vlan-id, which specifies the ID of the VLAN. For example, the name of
VLAN 100 is VLAN 0100.
Views
VLAN view
Predefined user roles
network-admin
mdc-admin
Parameters
text: Specifies a VLAN name, a string of 1 to 32 characters. The string can include case-sensitive
letters, digits, special characters such as tilde (~), exclamation point (!), at sign (@), pound sign (#),
dollar sign ($), percent sign (%), caret (^), ampersand sign (&), asterisk (*), left brace ({), right brace
(}), left parenthesis ((), right parenthesis ()), left bracket ([), right bracket (]), left angle bracket (<),
right angle bracket (>), hyphen (-), underscore(_), plus sign (+), equal sign (=), vertical bar (|), back
slash (\), colon (:), semi-colon (;) quotation marks ("), apostrophe ('), comma (,), dot (.), and slash (/),
spaces, and other Unicode characters and symbols.
102