<Sysname> system-view
[Sysname] stp mode stp
Related commands
stp enable
•
stp global enable
•
stp global mcheck
•
stp mcheck
•
stp no-agreement-check
Use stp no-agreement-check to enable No Agreement Check on the ports.
Use undo stp no-agreement-check to disable No Agreement Check on the ports.
Syntax
stp no-agreement-check
undo stp no-agreement-check
Default
No Agreement Check is disabled.
Views
Layer 2 Ethernet interface view, Layer 2 aggregate interface view
Predefined user roles
network-admin
mdc-admin
Usage guidelines
This command takes effect only after you enable it on the root port.
When the setting is configured in Layer 2 Ethernet interface view, it takes effect on only that
interface.
When the setting is configured in Layer 2 aggregate interface view, it takes effect on only the
aggregate interface.
When the setting is configured on a member port in an aggregation group, it takes effect only after
the port leaves the aggregation group.
Examples
# Enable No Agreement Check on GigabitEthernet 3/0/1.
<Sysname> system-view
[Sysname] interface GigabitEthernet 3/0/1
[Sysname-GigabitEthernet3/0/1] stp no-agreement-check
stp pathcost-standard
Use stp pathcost-standard to specify a standard for the device to use when calculating the default
path costs for ports.
Use undo stp pathcost-standard to restore the default.
73