Display Interface - HP 12500 Series Command Reference Manual

Syntax
description text
undo description
Default
The description of an interface is the interface-name plus Interface. For example, the default
description of Bridge-Aggregation1 is Bridge-Aggregation1 Interface.
Views
Layer 2 aggregate interface view, Layer 3 aggregate interface view, Layer 3 aggregate subinterface
view
Predefined user roles
network-admin
mdc-admin
Parameters
text: Specifies the interface description, a string of 1 to 80 characters.
Examples
# Set the description of Layer 2 aggregate interface Bridge-Aggregation 1 to connect to the lab.
<Sysname> system-view
[Sysname] interface bridge-aggregation 1
[Sysname-Bridge-Aggregation1] description connect to the lab

display interface

Use display interface to display aggregate interface information.
Syntax
display interface [ bridge-aggregation | route-aggregation ] [ brief [ description ] ]
display interface { bridge-aggregation | route-aggregation } interface-number [ brief
[ description ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
bridge-aggregation: Displays information about Layer 2 aggregate interfaces.
route-aggregation: Displays information about Layer 3 aggregate interfaces.
interface-number: Specifies an existing aggregate interface number. The value range for the
interface-number argument is the set of all existing aggregate interface numbers.
14