HP 12500 Series Command Reference Manual page 151

mac-physic | max-frame-size | power } | med-tlv { all | capability | inventory | location-id
{ civic-address device-type country-code { ca-type ca-value }&<1-10> | elin-address tel-number } |
power-over-ethernet } }
undo lldp tlv-enable { basic-tlv { all | management-address-tlv [ ip-address ] | port-description |
system-capability | system-description | system-name } | dot3-tlv { all | link-aggregation |
mac-physic | max-frame-size | power } | med-tlv { all | capability | inventory | location-id |
power-over-ethernet } }
Default
The device can advertise on a Layer 2 Ethernet port all types of LLDP TLVs except location
identification TLVs, and advertise on a Layer 3 Ethernet port all types of LLDP TLVs, except IEEE
802.1 organizationally specific TLVs, network policy TLVs, and location identification TLVs.
Views
Layer 2 Ethernet interface view, Layer 3 Ethernet interface view
Predefined user roles
network-admin
mdc-admin
Parameters
all: Advertises all basic LLDP TLVs, IEEE 802.1 organizationally specific LLDP TLVs, or IEEE 802.3
organizationally specific LLDP TLVs when the all keyword is specified for basic-tlv, dot1-tlv, or
dot3-tlv in Layer 2 Ethernet interface view; advertises all basic LLDP TLVs or IEEE 802.3
organizationally specific LLDP TLVs when the all keyword is specified for basic-tlv or dot3-tlv in
Layer 3 Ethernet interface view; or advertises all LLDP-MED TLVs except location identification TLVs
when the all keyword is specified for med-tlv, regardless of whether in Layer 2 or Layer 3 Ethernet
interface view.
basic-tlv: Advertises basic LLDP TLVs.
management-address-tlv [ ip-address ]: Advertises management address TLVs. ip-address specifies
the management address to be advertised. By default:
For a Layer 2 Ethernet port, the management address is the main IP address of the VLAN
•
interface that is in up state and whose corresponding VLAN ID is the lowest among the VLANs
permitted on the port. If none of the VLAN interfaces of the permitted VLANs is assigned an IP
address or all VLAN interfaces are down, no management address will be advertised.
For a Layer 3 Ethernet port, the management address is its own IP address. If no IP address is
•
configured for the Layer 3 Ethernet port, no management address will be advertised.
port-description: Advertises port description TLVs.
system-capability: Advertises system capabilities TLVs.
system-description: Advertises system description TLVs.
system-name: Advertises system name TLVs.
dot1-tlv: Advertises IEEE 802.1 organizationally specific LLDP TLVs.
port-vlan-id: Advertises port VLAN ID TLVs.
protocol-vlan-id [ vlan-id ]: Advertises port and protocol VLAN ID TLVs. The vlan-id argument
specifies a VLAN ID in the TLVs to be advertised, is in the range of 1 to 4094, and defaults to the
lowest VLAN ID on the port.
146