Link-Aggregation Port-Priority - HP 12500 Series Command Reference Manual

Syntax
link-aggregation mode dynamic
undo link-aggregation mode
Default
An aggregation group operates in static aggregation mode.
Views
Layer 2 aggregate interface view, Layer 3 aggregate interface view
Predefined user roles
network-admin
mdc-admin
Examples
# Configure the aggregation group that corresponds to Bridge-Aggregation 1 to operate in
dynamic aggregation mode.
<Sysname> system-view
[Sysname] interface bridge-aggregation 1
[Sysname-Bridge-Aggregation1] link-aggregation mode dynamic

link-aggregation port-priority

Use link-aggregation port-priority to set the port priority of an interface.
Use undo link-aggregation port-priority to restore the default setting.
Syntax
link-aggregation port-priority port-priority
undo link-aggregation port-priority
Default
The port priority of an interface is 32768.
Views
Layer 2 Ethernet interface view, Layer 3 Ethernet interface view
Predefined user roles
network-admin
mdc-admin
Parameters
port-priority: Specifies the port priority in the range of 0 to 65535. The smaller the value, the higher
the port priority.
Examples
# Set the port priority of Layer 2 Ethernet interface GigabitEthernet 3/0/1 to 64.
<Sysname> system-view
[Sysname] interface GigabitEthernet 3/0/1
[Sysname-GigabitEthernet3/0/1] link-aggregation port-priority 64
31