VLAN commands
Basic VLAN commands
default
Use default to restore the default settings for a VLAN interface.
Syntax
default
Views
VLAN interface view
Predefined user roles
network-admin
mdc-admin
Usage guidelines
CAUTION:
The default command might interrupt ongoing network services. Make sure you are fully
aware of the impacts of this command when you use it in a live network.
This command might fail to restore the default settings for some commands for reasons such as
command dependencies and system restrictions. Use the display this command in interface view to
identify these commands, and then use their undo forms or follow the command reference to
individually restore their default settings. If your restoration attempt still fails, follow the error
message instructions to resolve the problem.
Examples
# Restore the default settings for VLAN-interface 1.
<Sysname> system-view
[Sysname] interface vlan-interface 1
[Sysname-Vlan-interface1] default
description
Use description to change the description of the VLAN or VLAN interface.
Use undo description to restore the default.
Syntax
description text
undo description
95