Example For Filtering Data With Regular Expression Match - HPE FlexFabric 5700 Series Network Management And Monitoring Configuration Manual

Example for filtering data with regular expression match

Network requirements
Retrieve all data including colons in the Description column of the Interfaces table under the Ifmgr
module.
Configuration procedure
# Enter XML view.
<Sysname> xml
# Exchange capabilities.
<hello xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<capabilities>
<capability>
</capability>
</capabilities>
</hello>
# Retrieve all data including colons in the Description column of the Interfaces table under the Ifmgr
module.
<?xml version="1.0"?>
<rpc message-id="100"
xmlns="urn:ietf:params:xml:ns:netconf:base:1.0"
xmlns:reg="http://www.h3c.com/netconf/base:1.0">
<get>
<filter type="subtree">
<top xmlns="http://www.h3c.com/netconf/data:1.0">
<Ifmgr>
</Ifmgr>
</top>
</filter>
</get>
</rpc>
Verifying the configuration
If the client receives the following text, the operation is successful:
<?xml version="1.0" encoding="UTF-8"?>
<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0"
xmlns:reg="http://www.h3c.com/netconf/base:1.0" message-id="100">
<data>
<top xmlns="http://www.h3c.com/netconf/data:1.0">
urn:ietf:params:netconf:base:1.0
<Interfaces>
<Interface>
<Description
</Interface>
</Interfaces>
<Ifmgr>
<Interfaces>
<Interface>
<IfIndex>2681</IfIndex>
reg:regExp=":"/>
247