Table of Contents
Advertisement
Quick Links
8/18/2020
HPE FlexFabric 5710 Switch Series - Installing the Switch
Installing the switch
Installing the switch in a 19-inch rack
Rack-mounting procedures at a glance
Attaching the mounting brackets, chassis rails, andgrounding cable to the chassis
Mounting bracket installation positions and grounding positions on an HPE5710-54HT switch
Attaching the mounting brackets and chassis rails to the chassis
Connecting the grounding cable to the chassis
Attaching the slide rails to the rack
Mounting the switch in the rack
Grounding the switch by using a grounding strip
Link to the list of available documents
Installing the switch
Hardware installation flow
HPE FlexFabric 5710 Switch Series - Installing the Switch
HPE Support Center
1/7
Advertisement
Table of Contents
Related Manuals for HPE FlexFabric 5710 Series
Summary of Contents for HPE FlexFabric 5710 Series
- Page 1 8/18/2020 HPE FlexFabric 5710 Switch Series - Installing the Switch HPE Support Center HPE FlexFabric 5710 Switch Series - Installing the Switch Installing the switch Installing the switch in a 19-inch rack Rack-mounting procedures at a glance Attaching the mounting brackets, chassis rails, andgrounding cable to the chassis...
- Page 2 8/18/2020 HPE FlexFabric 5710 Switch Series - Installing the Switch Installing the switch in a 19-inch rack Installation accessories Switch model Mounting brackets Rack mounting rail kit HPE 5710-54HF HPE 5710-30HF 1U high, one pair 1U high, including one pair of chassis rails and onepair of long slide rails...
- Page 3 The switch has two mounting bracket installation positions on its two sides: one near the networkport side and one near the power supply side. The switch provides a primary grounding point (with a grounding sign) and an auxiliary groundingpoint. Mounting bracket installation positions and grounding positions on the HPE5710-54HF and HPE 5710-30HF switches...
- Page 4 Mounting bracket installation position near the port side Attaching the mounting brackets and chassis rails to the chassis The mounting bracket and chassis rail installation methods are the same for the HPE 5710-54HFand HPE 5710-30HF switches. To attach the mounting brackets and chassis rails to the chassis: 1.
- Page 5 3. Use M4 screws (provided) to attach the chassis rails to the chassis. Attaching the mounting brackets and chassis rails to an HPE 5710-54HF switch(mounting brackets installed near the port side) Attaching the mounting brackets and chassis rails to an HPE 5710-54HT switch(mounting brackets installed near the port side)
- Page 6 Make sure the front ends of the long slide rails reach out of the chassis rails. The rack-mounting procedures are the same for the HPE 5710-54HT and HPE 5710-54HF switches.The following figures use the HPE 5710-54HF switch as an example.
- Page 7 Hewlett Packard Enterprise Development shall not be liable for technical or editorial errors or omissions contained herein. The information provided is provided "as is" without warranty of any kind. To the extent permitted by law, neither HPE nor its affiliates, subcontractors or suppliers will be liable for incidental, special or consequential damages including downtime cost;...
Need help?
Do you have a question about the FlexFabric 5710 Series and is the answer not in the manual?
Questions and answers