Cli Operation Example; Configuration Requirements - HPE FlexFabric 5700 Series Network Management And Monitoring Configuration Manual

<CLI>
<Execution>
<![CDATA[Responses to the commands]]>
</Execution>
</CLI>
</rpc-reply>

CLI operation example

Configuration requirements

Send the display current-configuration command to the device.
Configuration procedure
# Enter XML view.
<Sysname> xml
# Exchange capabilities.
<hello xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<capabilities>
<capability>
</capability>
</capabilities>
</hello>
# Copy the following text to the client to execute the display current-configuration command:
<?xml version="1.0" encoding="UTF-8"?>
<rpc message-id="101" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<CLI>
<Execution>
display current-configuration
</Execution>
</CLI>
</rpc>
Verifying the configuration
If the client receives the following text, the operation is successful:
<?xml version="1.0" encoding="UTF-8"?>
<rpc-reply message-id="101" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<CLI>
<Execution><![CDATA[
<Sysname>display current-configuration
#
version 7.1.045, ESS 2305
#
sysname ASBR2
#
telnet server enable
#
irf mac-address persistent timer
irf auto-update enable
urn:ietf:params:netconf:base:1.0
250