HPE FlexFabric 5700 Series Network Management And Monitoring Configuration Manual page 96

Step
1. Enter system view.
2. (Optional.) Enable the SNMP
agent.
3. (Optional.) Configure the
system contact.
4. (Optional.) Configure the
system location.
5. Enable SNMPv3.
6. (Optional.) Change the local
engine ID.
7. (Optional.) Configure a
remote engine ID.
8. (Optional.) Create or update a
MIB view.
9. (Optional.) Create an
SNMPv3 group.
Command
system-view
snmp-agent
snmp-agent sys-info contact
sys-contact
snmp-agent sys-info location
sys-location
•
In non-FIPS mode:
snmp-agent sys-info
version { all | { v1 | v2c |
v3 }* }
•
In FIPS mode:
snmp-agent sys-info
version { all | { v1 | v2c |
v3 }* }
snmp-agent local-engineid
engineid
snmp-agent remote { ip-address |
ipv6 ipv6-address }
[ vpn-instance
vpn-instance-name ] engineid
engineid
snmp-agent mib-view
{ excluded | included }
view-name oid-tree [ mask
mask-value ]
•
In non-FIPS mode:
snmp-agent group v3
87
Remarks
N/A
By default, the SNMP agent is
disabled.
The SNMP agent is enabled
when you use any command that
begins with snmp-agent except
for the snmp-agent
calculate-password command.
By default, no system contact is
configured.
By default, no system location is
configured.
By default, SNMPv3 is used.
By default, the local engine ID is
the company ID plus the device
ID.
IMPORTANT:
After you change the local
engine ID, the existing SNMPv3
users and encrypted keys
become invalid, and you must
reconfigure them.
By default, no remote engine ID
is configured.
To send informs to an SNMPv3
NMS, you must configure the
SNMP engine ID of the NMS.
By default, the MIB view
ViewDefault is predefined. In
this view, all the MIB objects in
the iso subtree but the
snmpUsmMIB,
snmpVacmMIB, and
snmpModules.18 subtrees are
accessible.
Each view-name oid-tree pair
represents a view record. If you
specify the same record with
different MIB sub-tree masks
multiple times, the most recent
configuration takes effect.
Except for the four sub-trees in
the default MIB view, you can
create up to 16 unique MIB view
records.
By default, no SNMP group
exists.