HPE FlexFabric 5700 Series Network Management And Monitoring Configuration Manual page 266

Operation Description
•
Deletes the specified
configuration.
•
•
edit-config: delete
•
Modifies the current
configuration of the device using
the default operation method.
If you do not specify an
operation attribute for an
<edit-config> message,
NETCONF uses one of the
following default operation
attributes: merge, create, delete,
and replace. Your setting of the
value for the <default-operation>
element takes effect only once.
If you do not specify an
operation attribute and the
default operation method for an
<edit-config> message, merge
is always applied.
edit-config:
•
default-operation
•
•
If the specified target does
not exist, or the XML
message does not specify
any target, a success
message is returned.
If the specified target has
only the table index, the
operation removes all
configuration of the
specified target, and the
target itself.
If the specified target has
the table index and
configuration data, the
operation removes the
specified configuration data
of this target.
If the specified target does
not exist, an error message
is returned, showing that
the target does not exist.
merge—The default value
for the <default-operation>
element.
replace—Value used when
the operation attribute is
not specified and the
default operation method is
specified as replace.
none—Value used when
the operation attribute is
not specified and the
default operation method is
specified as none. If this
value is specified, the
<edit-config> operation is
used only for schema
verification rather than
issuing a configuration. If
257
XML example
The syntax is the same as the edit-config message
with the merge attribute. Change the operation
attribute from merge to delete.
To issue an empty operation for schema verification
purposes:
<rpc message-id ="101"
xmlns="urn:ietf:params:xml:ns:netconf:base
:1.0">
<edit-config>
<target>
<running/>
</target>
<default-operation>none</default-operation
>
<config
xmlns:xc="urn:ietf:params:xml:ns:netconf:b
ase:1.0">
<top
xmlns="http://www.h3c.com/netconf/config:1
.0">
<Ifmgr >
<Interfaces>
<Interface>
<Index>262</Index>
<Description>222222</Description>
</Interface>
</Interfaces>
</Ifmgr>
</top>
</config>
</edit-config>
</rpc>