Saving, Rolling Back, And Loading The Configuration; Saving The Configuration - HPE FlexFabric 5700 Series Network Management And Monitoring Configuration Manual

<running/>
</target>
<config>
<top xmlns="http://www.h3c.com/netconf/config:1.0" web:operation="merge">
</top>
</config>
</edit-config>
</rpc>
Verifying the configuration
If the client receives the following text, the <edit-config> operation is successful:
<?xml version="1.0" encoding="UTF-8"?>
<rpc-reply message-id="100" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<ok/>
</rpc-reply>

Saving, rolling back, and loading the configuration

Use NETCONF to save, roll back, or load the configuration.

Saving the configuration

# Copy the following text to the client to save the device configuration to the specified file:
<?xml version="1.0" encoding="UTF-8"?>
<rpc message-id="101" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<save>
<file>Specify the configuration file name</file>
</save>
</rpc>
The name of the specified configuration file must start with the storage media name and end with the
extension .cfg. The total length of the save path and file name must be no more than 191 characters.
If the text includes the file column, you must specify the file name. The specified file will be used as
the next-startup configuration file. If the text does not include the file column, the configuration is
automatically saved to the default main next-startup configuration file.
After receiving the save request, the device returns a response in the following format if the <save>
operation is successful:
<?xml version="1.0" encoding="UTF-8"?>
<rpc-reply message-id="101"
xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<ok/>
</rpc-reply>
<Syslog>
<LogBuffer>
<BufferSize>512</BufferSize>
</LogBuffer>
</Syslog>
242