HPE FlexFabric 5700 Series Network Management And Monitoring Configuration Manual page 180

Step
2. Create a remote destination
group.
Configuring the monitor port for a remote destination group
To configure the monitor port for a mirroring group, use one of the following methods:
•
Configure the monitor port for the mirroring group in system view.
•
Assign a port to the mirroring group as the monitor port in interface view.
When you configure the monitor port for a remote destination group, follow these restrictions and
guidelines:
•
Do not enable the spanning tree feature on the monitor port.
•
Use a monitor port only for port mirroring, so the data monitoring device receives only the
mirrored traffic.
•
A mirroring group must contain only one monitor port.
•
A monitor port can belong to only one mirroring group.
Configuring the monitor port for a remote destination group in system view
Step
1. Enter system view.
2. Configure the monitor port
for the specified remote
destination group.
Configuring the monitor port for a remote destination group in interface view
Step
1. Enter system view.
2. Enter interface view.
3. Configure the port as the
monitor port for the specified
remote destination group.
Configuring the remote probe VLAN for a remote destination group
When you configure the remote probe VLAN for a remote destination group, follow these restrictions
and guidelines:
•
Only an existing static VLAN can be configured as a remote probe VLAN.
•
When a VLAN is configured as a remote probe VLAN, use the remote probe VLAN for port
mirroring exclusively.
•
Configure the same remote probe VLAN for the remote groups on the source and destination
devices.
To configure the remote probe VLAN for a remote destination group:
Command
mirroring-group group-id
remote-destination
Command
system-view
mirroring-group group-id
monitor-port interface-type
interface-number
Command
system-view
interface interface-type
interface-number
mirroring-group group-id
monitor-port
171
Remarks
By default, no remote destination
group exists on a device.
Remarks
N/A
By default, no monitor port is
configured for a remote
destination group.
Remarks
N/A
N/A
By default, a port does not act as
the monitor port for any remote
destination group.