Suspending Monitor Policies; Displaying And Maintaining Eaa Settings - HPE FlexFabric 5700 Series Network Management And Monitoring Configuration Manual

Step
Write a Tcl script in two lines for a monitor policy, as shown in
Table 21 Tcl script requirements
Line
Line 1
Line 2

Suspending monitor policies

This task suspends all CLI-defined and Tcl-defined monitor policies except for the policies that are
running.
To suspend monitor policies:
Step
1. Enter system view.
2. Suspend monitor policies.

Displaying and maintaining EAA settings

Execute display commands in any view.
Task
Display user-defined EAA environment variables.
Display EAA monitor policies.
Command
Content
Event, user roles, and policy
runtime
Actions
Command
system-view
rtm scheduler suspend
Remarks
cannot execute a Tcl-defined policy if
you edit its Tcl script without suspending
policies.
Table
Requirements
This line must take the following format:
::comware::rtm::event_register eventname arg1
arg2 arg3 ...user-role rolename1 | [ user-role
rolename2 | [ ] ][ running-time running-time ]
When you define an action, you can specify a value or
specify a variable name in $variable_name format for
an argument.
The following actions are available:
•
Standard Tcl commands.
•
EAA-specific Tcl commands.
•
Commands supported by the device.
Command
display rtm environment [ var-name ]
display rtm policy { active | registered }
[ policy-name ]
200
21.
Remarks
N/A
To resume monitor polices, use
the undo rtm scheduler
suspend command.