Zhone zNID-GPON-2402 Configuration Manual page 97

Table 36: Defining port forwarding rules
UI Label
Name
Type
Port Start
Port End
Protocol
NAT Interface
Private IP Address
Port
The Add Rule button will save the configured rule if valid. NOTE: these rules
have no effect until the global firewall option is enabled.
Description
User defined name to identify rule.
•
DMZ
When DMZ is chosen it is the only rule allowed on
that interface. A DMZ rule is effectively the same
as a Range rule with all ports included.
•
Range
Range rules are more secure than setting a DMZ
rule, because Range rules allow specific ports or
groups of ports to be opened up. Range indicates
that any traffic on those ports will be sent to the
private IP address.
•
Remap
Remap indicates that any traffic on those ports will
be sent to the private IP address at the private port.
Lowest value port number for the range.
Highest value port number for the range. This can be
equal to Port Start if there is only one port.
TCP, UDP or Both indicate which protocols to monitor
for the port numbers.
The Interface to monitor for this rule.
The IP address to which to send the traffic.
The Port address to which to send the traffic.
zNID 24xx Series Configuration Guide
Configuration pages
97