System Log - Zhone zNID-GPON-2402 Configuration Manual

System log

The zNID 24xx supports the system log feature as defined in RFC 5424. The
zNID 24xx supports all 8 message severities:
Table 4: System log message severity levels
Message severity Description
0 Emergency: system is unusable
1 Alert: action must be taken immediately
2 Critical: critical conditions
3 Error: error conditions
4 Warning: warning conditions
5 Notice: normal but significant condition
6 Informational: informational messages
7 Debug: debug-level messages
The parameter, Log Level, determines what messages will be stored in the
system log. Any message equal to or greater in priority to the log level setting
will be stored in the syslog. The parameter, Display Level, determines what
messages are displayed on the web or the CLI. The parameter, Mode,
determines where the messages will be stored. The local messages can be
stored in RAM, or they can be stored in a file for later review, or they can be
sent to a remote syslog server. Only one remote server is allowed. The priority
of the messages is selected by a separate parameter.
Figure 17: Configuring the system log
zNID 24xx Series Configuration Guide
System features
39