Zhone zNID-GPON-2402 Configuration Manual page 195

b In the VLAN Name text box enter a name for the VLAN
c In the VLAN Tag ID text box enter a VLAN ID
d <Optional> From the Secure Forwarding dropdown select either
Enable or Disable
See Add New VLAN on page 148
e From the Connection Type dropdown select Bridged
f
Click Apply/Save
2
Select ports and set port defaults
a
From the Configuration - VLAN Settings => Edit Selected VLAN
page (which you should be on automatically after completing the
previous step) Select the port members.
Figure 153: Selecting port members and their tagging
Normally the uplink (Fiber WAN (eth0) will be Tagged as in this
example. Select T from the Fiber WAN (eth0) dropdown
In this example we are only selected one untagged downstream
interface. Select U from the GE1 - GigE (eth1) dropdown
b Click Save/Apply
c
From the VLAN | Settings page click Edit Port Defaults
Deployment scenarios
for more information
zNID 24xx Series Configuration Guide
195