Wep Encryption - Zhone zNID-GPON-2402 Configuration Manual

Configuration
124
zNID 24xx Series Configuration Guide

WEP Encryption

WEP (Wire Equivalent Privacy) is encryption based on an encryption key
strength of 64 or 128 bits. Up to 4 different keys can be set and you can come
back to select which one to use at anytime.
Figure 92: Setting up WEP network keys
Table 43: Configuration parameters for WEP Encryption Enabled
UI Label
WEP Encryption
Encryption Strength
Current Network Key
Network Key 1, 2, 3, 4
Description
Enabled has WEP encryption on, disabled is clear
text (NOTE that some authentication methods use
WEP Encryption by default so the WEP
Encryption dropdown will only allow Enabled.
Other authentication methods which do not use
WEP encryption will only allow Disabled and be
grayed out.)
64 or 128 bits. For 64 bit encryption 10
hexadecimal digits or 5 ASCII characters are
entered. For 128 bit encryption 26 hexadecimal
digits or 13 ASCII characters are entered. The
network key is concatenated with an initialization
vector to form an RC4 key.
Allows you to select one of the four Network
keys.
Provide the network key input for the RC4 key.