Creating Wireless Connections - Zhone zNID-GPON-2402 Configuration Manual

Configuration

Creating wireless connections

188
zNID 24xx Series Configuration Guide
Wireless connections are created just like other connections in that the
wireless interface is selected for port membership
Creating a new VLAN with wireless connection
1
Create VLAN
Follow the steps for the type of connection: bridged, routed, PPPoE
bridged or PPPoE routed
2
Select ports and set port defaults
Follow the steps for the type of connection: bridged, routed, PPPoE
bridged or PPPoE routed and include the wireless ports in the port
Figure 149: Port membership for wireless interfaces
3 Adjust WAN settings (Routed and PPPoE connections)
Follow the steps for the type of connection: bridged, routed, PPPoE
bridged or PPPoE routed
4 Adjust LAN settings (Routed and PPPoE connections)
Follow the steps for the type of connection: bridged, routed, PPPoE
bridged or PPPoE routed
5
Configure Wireless (Wireless connections only)
Set authentication and encryption features as well as other wireless
options. See Wireless, page 108 for the wireless options.