Static Route - Zhone zNID-GPON-2402 Configuration Manual

Static route

The Configuration | Static Route page provides the mechanism for adding
static routes to the zNID.
Figure 62: The Static Route page has a table of static routes
To add a route, click Add.
Figure 63: Adding a static route
Table 33: Adding a static route
UI Label
Destination IP address
Interface
Gateway IP Address
Metric
Description
The IP address of the destination device. This field will
accept an IP address/n notation where the "/n"
represents the number of bits for creating a network
mask. For example a net mask of 255.255.255.0 is 24
bits and would be designated by a "/24"
The LAN interface for the static route
The IP address of the default gateway for the subnet in
which the zNID resides.
Defines the number of hops to the destination. The
metric must be 0 or greater.
zNID 24xx Series Configuration Guide
Configuration pages
91