Creating a TLS bridge
1
Set the VLAN Service Mode to S-Tag
Figure 162: Selecting S-Tag
a
Select Configuration | VLAN | Modes
b On the Configuration - VLAN Modes page, select S-Tag from the
VLAN Service Modes dropdown.
c
Click Apply
2
Create a VLAN, select TLS-Bridged
If you have created other VLANs you will note that changing the mode
adds an option to the connection type menu
Figure 163: Selecting TLS-Bridged
a
From the Configuration | VLAN | Settings page, click Add New
VLAN
b In the VLAN Name text box enter a name for the VLAN
c
In the VLAN Tag ID text box enter a VLAN ID
zNID 24xx Series Configuration Guide
VLANS
203