Rules - Zhone zNID-GPON-2402 Configuration Manual

Rules

The Configuration|Access Control|Rules page defines the access control list rules.
Figure 65: Defining the rules for access list
Table 34: Adding an access control rule
UI Label
Interface
Rule Name
Source IP Address/
Prefix
Protocol
Source MAC Address
MAC Mask
Description
Selects the physical interface to which the configured
rule will apply. Changes made to the selection will
cause the access control filtering table for the selected
(and deselected) interface to change.
A required user defined identifier for the rule. This
identifier must be unique per interface rule.
The IP address or subnet to filter. If the Prefix is 32
then the whole address is used. Otherwise the prefix
indicates the subnet to filter against. Example:
192.168.1.0/24 would filter against the 192.168.1
subnet.
Select either ICMP, IGMP, TCP or UDP.
The MAC address to filter. MAC addresses have the
format AA:BB:CC:DD:EE:FF.
Mask by which to filter MAC address. For example a
MAC Mask of ff:ff:ff:00:00:00 would filter against the
first six digits of the MAC address.
zNID 24xx Series Configuration Guide
Configuration pages
93