Management
80
zNID 24xx Series Configuration Guide
Table 29: Table of VoIP lines status and statistics
UI Label
RTP Statistics
Incoming Calls
Outgoing Calls
Description
The statistics provided refer to the previous completed
call
•
Packets Sent – The number of packetized data
buffers sent into the network.
•
Packets Received – The number of packetized
data buffer received from the network.
•
Bytes Sent – The cumulative count of data bytes in
the packets sent to the network.
•
Bytes Received – The cumulative count of data
bytes in the packets received from the network.
•
Packets Lost – Number of packets not received
based on sequence numbers.
The statistics provided refer to the previous completed
call
•
Received – A connect command was received
from the Switch and the call is in Receive Only
mode so that the phone can ring.
•
Answered – A connect command was received
from the Switch and the call is in Send and
Receive mode.
•
Connected – A Disconnect that had one or more
Packets Received.
•
Failed – A Disconnect that had no Packets
Received.
•
Attempted – Dialed number sent to the switch.
•
Answered – A connect command was received
from the Switch and the call is inSend and Receive
mode.
•
Connected – A Disconnect that had one or more
Packets Received.
•
Failed – A Disconnect that had no Packets
Received