Zhone zNID-GPON-2402 Configuration Manual page 165

Note: Make sure that a VLAN is created with a matching VLAN
ID and the LAN ports are configured as untagged members of
that VLAN.
The default PVID is only used to determine how ingress untagged
traffic will be tagged. The VLAN table defines the egress action.
e
From the Uplink eth0 should be selected
Selecting the Fiber WAN interface adds this VLAN to the uplink.
f
Click Save/Apply
3 Configure Wireless (Wireless connections only)
Set port membership, authentication and encryption features as well as
other wireless options. See Creating wireless connections, page
zNID 24xx Series Configuration Guide
Deployment scenarios
188.
165