Zhone zNID-GPON-2402 Configuration Manual page 142

Configuration
142
zNID 24xx Series Configuration Guide
Table 50: Voice line configuration
UI Label
Silence Suppression
Echo Cancellation
Call Waiting
Three-way Calling
Message Waiting
Hotline Enable
Hotline Number
Phone Follows WAN
Tx Path Gain (dB)
Rx Path Gain (dB)
G.729A (ACELP)
G.726 (ADPCM)
G.711MuLaw (PCM)
G.711ALaw (PCM)
Description
Check enables Silence Suppression.
Check enables Echo Cancellation.
Check enables Call Waiting
Check enables Three-way calling
When enabled, a SUBSCRIBE message will be sent
after Registration to subscribe to message waiting.
When enabled the phone will immediately dial the
Hotline number.
The only number this phone will dial, if Hotline is
enabled
When enabled the phone will lose power any time the
WAN is operation status of down. This will allow line
monitoring equipment to detect loss of service.
Transmit Gain of the upstream analog to digital path for
phone to network.
Receive Gain of the downstream analog to digital path
for network to phone.
The highest priority codec will be selected first if
offered by the switch. If Do Not Use is selected. The
G.729A (ACELP) codec will omit from the selection
choice.
The highest priority codec will be selected first if
offered by the switch. If Do Not Use is selected. The
G.726 (ADPCM) codec will omit from the selection
choice
The highest priority codec will be selected first if
offered by the switch. If Do Not Use is selected. The
G.711MuLaw (PCM) codec will omit from the
selection choice
The highest priority codec will be selected first if
offered by the switch. If Do Not Use is selected. The
G.711ALaw (PCM) codec will omit from the selection
choice